Anycubic Wash & Cure 3 Max: Washing and Curing System for 3D Printing

Anycubic Wash & Cure 3 Max: The Complete Station for Washing and Polymerizing 3D Molds

The Anycubic Wash & Cure 3 Max is an advanced device that combines washing and polymerization functions in a single process. It offers a large working capacity of up to 14.9 liters and a maximum cleaning area of 300 × 165 × 300 mm, allowing you to easily manage large models and most 3D resin printers with a diagonal of up to 13.6 inches. With an alcohol consumption of less than 50 ml per cycle and the ability to clean up to 20 models using a single 5-liter container, the device significantly reduces operating costs and optimizes the entire process.

Effective cleaning thanks to the Double Wash System

The use of two modes - spray and immersion - allows the complete removal of resin residues both from the surface of the model and from hard-to-reach details. The mechanical jets of liquid effectively reach every part of the print, while the additional immersion rinse removes debris trapped in the recesses. This combination of methods results in more thorough cleaning, reducing alcohol consumption by more than 50% compared to traditional solutions.

High Compatibility and Workspace

The device has a large 14.9 liter working chamber. It supports models up to 300 × 165 × 300 mm and printing platforms up to 12 inches in size and weighing up to 2.2 kg. This makes it suitable for both large projects and batch processing of prints.

360° polymerization

The automatically rotating polymerization platform ensures uniform exposure of the models from all sides. A high polymerization energy of 25,000 µW/cm² and a wider exposure range allow effective and precise polymerization of even the most complex structures.

Process Automation

The operation of the device has been simplified to the maximum thanks to the One-click Washing and Curing function. The push of a single button starts the entire process, eliminating the need to manually manage multiple steps. This solution significantly reduces processing times and minimizes user intervention, especially in high-volume printing.

Alcohol Savings and Lower Operating Costs

The device is designed for efficient use of isopropyl alcohol. Cleaning large models requires only about 4 liters of liquid, while traditional devices require up to 8.5 liters. In addition, a single cycle consumes less than 50 ml of alcohol, significantly reducing costs and the frequency of replacing the cleaning solution.

Convenient Use and Error Detection

The integrated flip-top lid allows for quick opening and closing, and the intuitive control panel ensures convenient operation at every step of the process. The intelligent diagnostics system continuously monitors the operation of the device and alerts in case of potential problems. The device reports, among other things, an open lid, a low liquid level or a blocked drain.

Contents of the pack

• Device for washing and polymerizing prints
• Tray
• Detergent container x1
• Tank x1
• Water container x1
• Tubes x4
• Allen wrench set
• Plastic scraper
• Replacement filter for the container
• User manual x1
• Power adapter with power cable